Mechanical Design Practice - 2017

To enrol in this unit, you must be accepted into a course from the provider. Read before you start

Unit summary


  • Level of Study: Undergraduate Level 2
  • Study load: 0.125 EFTSL
  • Delivery method: Fully Online
  • Prerequisites: Yes
  • Duration: 13 weeks
  • Government loans available: HECS-HELP
  • Availability for 2017: SP3
  • Availability for 2018: SP3
  • Assessment: Assignment 1 - 40 pages (20%) , Assignment 2 - 40 pages (20%) - Learn more

Unit provided by

2017 Fees
Domestic 1,131.00
HECS 1,131.00

The unit aims to engender enthusiasm for design and to provide the basis of sound design methodology, together with fundamental material selection and component design. Design methodology includes decision making, proper recording of design calculations and decisions in design reports, accountability and legal aspects of design calculations. Factors of safety are emphasised with balanced design of simple components.

Considerations of static failure design for bending and torsions, stress analysis, along with linear actuators and springs, eccentrically loaded bolted and welded connections, cyclic loads, stress raisers and design of shafts to AS1403. Other design methods include fracture mechanics, fatigue, design of spur gears for bending, strength and surface durability and disc brake and multi-plate clutches.

At the completion of this unit students will be able to:

  1. apply an appropriate design methodology and discuss the legal implications of the design process
  2. select appropriate materials to satisfy design requirements
  3. explain material behaviour and simply failure mechanisms and design for these situations
  4. design mechanical components for strength and deflection with regard to safety standards
  5. correctly select standard components from manufacturer's catalogues.
  • Assignment 1 — 40 pages (20%)
  • Assignment 2 — 40 pages (20%)
  • Invigilated Exam — 3 hours (50%)
  • Quiz — Weekly (10%)
For more information on invigilated exams see Exams and results

Mandatory conditional prerequisites

You must either have successfully completed the following unit(s) before starting this unit, or currently be enrolled in the following unit(s) in a prior study period; or enrol in the following unit(s) to study prior to this unit:

Please note that your enrolment in this unit is conditional on successful completion of these prerequisite unit(s). If you study the prerequisite unit(s) in the study period immediately prior to studying this unit, your result for the prerequisite unit(s) will not be finalised prior to the close of enrolment. In this situation, should you not complete your prerequisite unit(s) successfully you should not continue with your enrolment in this unit. If you are currently enrolled in the prerequisite unit(s) and believe you may not complete these all successfully, it is your responsibility to reschedule your study of this unit to give you time to re-attempt the prerequisite unit(s).

If you have completed equivalent study at another university, please contact a Student Advisor for advice.

  • Additional materials — Students will require Windows Vista, Windows 7 or higher. UniSA does not support Windows XP.
  • Audio/Visual equipment — Audio headset with microphone are required to access weekly consultation and help desk facilities.

In order to enrol in this unit, you must be accepted into one of the following courses:

Please visit the course details page and read the Requirements tab for more information about eligibility.

This unit addresses the following topics.

1Introduction to mechanical design
2Static design
3Linear actuators and Springs
4Eccentrically-loaded, bolted and welded connections
5Rotating shafts
6Rolling element bearings
7Plane and hydrodynamic bearings
8Design for fatigue
9Fatigue of bolted joints
10Brittle fracture and fracture mechanics
11Design of spur gears
12Belt, chain and wire rope drives
13Clutches and brakes

This unit is delivered using the following methods and materials:

Instructional Methods

  • Audio/Video conferencing
  • Blogs
  • Discussion Forum/Discussion Board
  • E-Portfolios
  • Embedded Multimedia
  • Online Quizzes/Tests
  • Online assignment submission
  • Podcasting/Lecture capture
  • Standard Media
  • Streaming Multimedia
  • Virtual Classroom
  • Web links
  • Wikis

Online materials

  • Audio/Video - Streaming
  • Online Assessment
  • Quizzes
  • Resources and Links

This unit is part of a major, minor, stream or specialisation in the following courses:

This unit may be eligible for credit towards other courses:

  1. Many undergraduate courses on offer through OUA include 'open elective' where any OUA unit can be credited to the course. You need to check the Award Requirements on the course page for the number of allowed open electives and any level limitations.
  2. In other cases, the content of this unit might be relevant to a course on offer through OUA or elsewhere. In order to receive credit for this unit in the course you will need to supply the provider institution with a copy of the Unit Profile in the approved format, which you can download here. Note that the Unit Profile is set at the start of the year, and if textbooks change this may not match the Co-Op textbook list.

Textbooks are subject to change within the academic year. Students are advised to purchase their books no earlier than one to two months before the start of a unit.

Click on the titles of the listed books below to find out more:

Required textbooks

  • Shigley's Mechanical Engineering Design Si 10E


    ISBN: 9789813151000


    Supplier:Go to The Co-op Bookshop

  • Enquire online

    Need to ask a question that's best put down in words?
    Make an online enquiry.

    Enquire now

    Ready to enrol?

    Start studying this unit now.


    Got a question?

    Get an answer from one of our friendly Student Advisors.